Evidence-Based Clinical Metric · Medically Reviewed November 2026

FFMI Calculator

Fat-free mass index (FFMI) divides fat-free mass by height squared, so it compares muscularity across heights the way body mass index compares weight. This calculator takes weight, height, and body-fat percentage, then returns fat-free mass, raw FFMI, and the height-normalized FFMI from Kouri et al. (1995), with reference bands for men and women and the 25.0 benchmark.

Disclaimer: This tool is for educational and clinical reference purposes only. It is not intended to replace professional medical judgment, diagnosis, or treatment. Active or severe acute symptoms require immediate emergency care.
Quick answer: Fat-free mass is weight × (1 − body-fat %). Divide it by height in metres squared for raw FFMI, then add 6.3 × (1.80 − height in metres) to normalize to a 1.80 m reference. For an 80 kg man at 180 cm and 15% body fat: 68.0 kg of fat-free mass, raw FFMI 21.0, normalized FFMI 21.0 — above average for a man.

What the number describes

The result is an index, not a weight. Fat-free mass is everything in the body except fat: muscle, bone, organs, and water. Dividing that mass by height squared removes the height advantage, so a shorter and a taller adult with the same build get similar scores. A higher FFMI means more lean tissue for the height; a lower one means less.

FFMI answers a different question from the site's BMI calculator, which divides total weight by height squared and cannot tell muscle from fat, and from the lean body mass calculator, which estimates fat-free mass in kilograms without scaling it by height. The body fat calculator estimates the body-fat percentage this page takes as an input. For energy needs built on lean tissue, the protein intake calculator works from body weight and goal.

Sex, weight, height & body fat

Calculate Your FFMI

Enter sex, weight, height, and body-fat percentage. The calculator shows fat-free mass, raw FFMI, and the height-normalized FFMI, with the working at each step.

Your details

How Is FFMI Calculated?

The calculator works in three steps: find fat-free mass from weight and body-fat percentage, divide by height squared for raw FFMI, then apply the height correction from Kouri et al. (1995) for normalized FFMI. The correction matters because taller adults carry slightly less lean mass per square metre of height, so raw FFMI alone flatters shorter adults and understates taller ones. At exactly 180 cm the correction is zero, and raw and normalized FFMI are the same.

Fat-free mass (kg) = weight (kg) × (1 − body-fat % ÷ 100)
Raw FFMI = fat-free mass (kg) ÷ height (m)²
Normalized FFMI = raw FFMI + 6.3 × (1.80 − height in m)

Height in feet and inches is converted first: metres = (feet × 12 + inches) × 0.0254. A height of 5 ft 11 in converts to 1.803 m, so the two ways of entering it differ by a fraction of a centimetre and the index moves by about a tenth of a point. Weight in pounds is converted the same way: kilograms = pounds ÷ 2.20462.

The calculator also shows the fat-free mass at the reference limit: the mass that gives a normalized FFMI of 25.0 for a man, or 21.5 for a woman, at the entered height. The formula is the same one rearranged: fat-free mass at the limit = (limit − 6.3 × (1.80 − height in m)) × height (m)².

Variable table

ComponentClinical measurementReference rangeUnits
SexBiological sex; the reference bands differ for men and womenMale / female—
Body weightWeight in kilograms, or pounds converted to kilogramsCalculator range: 30–250 kg (66–551 lb)kg or lb
HeightHeight in metres, or feet and inches converted to metresCalculator range: 120–220 cmcm or ft/in
Body-fat percentageShare of body weight that is fat, from a measurement such as skinfold calipers, bioelectrical impedance, or a DEXA scanCalculator range: 3–60%%
Fat-free massWeight minus fat massVaries with weight and body fatkg
Raw FFMIFat-free mass divided by height squaredVaries with fat-free mass and heightkg/m²
Normalized FFMIRaw FFMI plus the Kouri height correctionVaries with raw FFMI and heightkg/m²
Height correction6.3 × (1.80 − height in m); zero at 180 cm, positive below it, negative above it−2.5 to +3.8 over the calculator's height rangekg/m²

Only sex, weight, height, and body-fat percentage enter the formula. Age does not appear in it: the index describes the body as it is now, whatever the age. For the energy side of the same body, the site's BMR calculator isolates the resting-energy figure, and the TDEE calculator adds the activity step.

What Do the FFMI Bands Mean?

The bands below use normalized FFMI, the value the published ranges refer to. They are population reference bands from athletic and general-population data, not clinical cutoffs: no medical body sets an FFMI threshold for health. Men and women use different bands because men carry more skeletal muscle relative to height on average.

Reference bands for men (normalized FFMI)

Normalized FFMIBandTypical profile
Under 18Below averageLittle muscle development; untrained or sedentary
18–20AverageGeneral male population; light training
20–22Above averageRegular strength training; visibly athletic
22–23ExcellentDedicated training over several years
23–25SuperiorAdvanced athlete, near the drug-free range observed
Above 25Above the drug-free range observedExceeds the highest value Kouri et al. recorded in drug-free male athletes

Reference bands for women (normalized FFMI)

Normalized FFMIBandTypical profile
Under 14Below averageLittle muscle development; untrained or sedentary
14–16AverageGeneral female population; light training
16–18Above averageRegular strength training; visibly athletic
18–19.5ExcellentDedicated training over several years
19.5–21.5SuperiorAdvanced athlete
Above 21.5Very highBeyond the top of the usual reference range for women

In the general population, Schutz et al. (2002) measured a median FFMI of 18.9 in men and 15.4 in women aged 18 to 34, which sits inside the average band for each sex. The women's bands sit about four points below the men's, and no equivalent of the 25.0 limit has been published for women, because Kouri et al. studied men only.

The 25.0 benchmark

The number 25.0 comes from Kouri et al. (1995), who measured 157 male athletes: 83 who had used anabolic-androgenic steroids and 74 who had not. The normalized FFMI of the drug-free athletes extended up to a limit of 25.0, and none exceeded it, while many steroid users did, some above 30. A separate group of 20 Mr. America winners from the pre-steroid era (1939–1959) averaged 25.4. The authors called the findings preliminary and described FFMI as an initial screen, not proof: a score above 25.0 is a population observation, and body-fat measurement error alone can move FFMI by a point.

Fat-Free Mass at Each Band for a 180 cm Man

The table below gives the fat-free mass in kilograms at each band edge for a man 180 cm tall, where the height correction is zero and raw and normalized FFMI match. For another height, multiply the band value by height in metres squared: at 170 cm, the 25.0 limit corresponds to 25 × 1.70² = 72.3 kg of fat-free mass.

Band edge (normalized FFMI)Fat-free mass at 180 cmBand
1858.3 kgAverage starts here
2064.8 kgAbove average starts here
2271.3 kgExcellent starts here
2374.5 kgSuperior starts here
2581.0 kgTop of the drug-free range observed

The pattern is the point of the table: the same index means different kilograms at different heights, which is why the index, not the mass, is the comparable figure. The lean body mass calculator estimates the mass itself, and the body fat calculator estimates the percentage that sets it.

When Is the FFMI Estimate Less Reliable?

FFMI is a simple ratio built on one measured figure, the body-fat percentage. The limits below decide whether the number on this page is a useful reference or a misleading one.

  • Body-fat measurement error. The body-fat percentage drives the result, and no at-home method measures it exactly. Skinfold calipers, bioelectrical impedance, and the US Navy circumference method each carry error, and a 3-point error in body fat moves FFMI by roughly half a point to a full point. A DEXA scan is the most accurate common method, and even it carries a margin. Re-measuring with the same method tracks change better than comparing across methods.
  • Children and adolescents. FFMI reference values come from adults. Growth changes the ratio of lean mass to height, so the bands on this page do not apply to children or teenagers.
  • Pregnancy. Body weight and body-fat estimates change in pregnancy, and the bands do not apply.
  • Illness, injury, and fluid shifts. Edema, dehydration, and acute illness change body water, which counts as fat-free mass, so the index can move without any change in muscle.
  • Women and the 25.0 limit. Kouri et al. studied men only. The women's bands are an offset scale from population data, and no natural limit for women has been published in the same way.
  • FFMI is not a health score. A high FFMI does not mean good health, and a low one does not mean poor health. Strength, aerobic fitness, blood pressure, blood sugar, and kidney function are separate measures, and the site's VO2 max calculator covers the aerobic side.
  • FFMI is not a drug test. A score above 25.0 is a population observation from one 1995 study of 157 athletes, not proof about any individual. Genuine genetic outliers exist, and measurement error can push a score across the line.

When the estimate is not enough, the alternative is a direct measurement: a DEXA scan for body composition, reviewed with a clinician or a qualified coach, gives the fat-free mass figure this calculator estimates from an entered percentage.

Worked Example

An 80 kg man, 180 cm tall, with 15% body fat, enters his details and selects male. The arithmetic is:

  • Fat mass: 80 × 15 ÷ 100 = 12.0 kg.
  • Fat-free mass: 80 − 12.0 = 68.0 kg (149.9 lb).
  • Raw FFMI: 68.0 ÷ 1.80² = 68.0 ÷ 3.24 = 21.0 (20.99 before rounding).
  • Height correction: 6.3 × (1.80 − 1.80) = 0, because the height is exactly 180 cm.
  • Normalized FFMI: 21.0 + 0 = 21.0.
  • Band: above average for a man (20–22).
  • Fat-free mass at the 25.0 limit: 25.0 × 3.24 = 81.0 kg, so 13.0 kg of fat-free mass sits between this man and the top of the range Kouri et al. observed.

The example matches the calculator exactly: the "Fill example" button loads a man, 80 kg, 180 cm, and 15% body fat, and Calculate returns 68.0 kg of fat-free mass, raw FFMI 21.0, and normalized FFMI 21.0, above average. A second check with a different body: a 60 kg woman, 165 cm, 25% body fat, gives 45.0 kg of fat-free mass, raw FFMI 16.5, and normalized FFMI 17.5, above average for a woman (16–18).

Frequently Asked Questions

What is FFMI?

Fat-free mass index is fat-free mass in kilograms divided by height in metres squared. It measures how much lean tissue — muscle, bone, organs, and water — a person carries for their height. Unlike body mass index, which uses total weight, FFMI strips fat out of the figure, so two adults with the same BMI can have very different FFMI values.

How is FFMI calculated?

In three steps. First, fat-free mass is weight × (1 − body-fat % ÷ 100). Second, raw FFMI is fat-free mass ÷ height in metres squared. Third, normalized FFMI adds the Kouri height correction, 6.3 × (1.80 − height in metres), which standardizes everyone to a 1.80 m reference. At exactly 180 cm the correction is zero.

What is a good FFMI?

For men, a normalized FFMI of 18 to 20 is average and 20 to 22 is above average; for women the same descriptions sit about four points lower, 14 to 16 average and 16 to 18 above average. In the general population, Schutz et al. (2002) measured a median FFMI of 18.9 in men and 15.4 in women aged 18 to 34. The bands are population references, not clinical cutoffs.

What does an FFMI of 25 mean?

It is the benchmark from Kouri et al. (1995), who measured 157 male athletes. None of the 74 drug-free athletes had a normalized FFMI above 25.0, while many steroid users did, some above 30. The authors called the findings preliminary and described FFMI as an initial screen, not proof. A score above 25.0 is a population observation, and body-fat measurement error alone can move FFMI by a point.

How accurate is an FFMI calculator?

It is only as accurate as the body-fat percentage entered. A 3-point error in body fat moves FFMI by roughly half a point to a full point. Skinfold calipers, bioelectrical impedance, and the US Navy method are estimates; a DEXA scan is the most accurate common method. Measuring with the same method each time tracks change better than comparing across methods.

How is FFMI different from BMI and lean body mass?

BMI divides total weight by height squared, so it cannot tell muscle from fat. Lean body mass is the fat-free mass itself, in kilograms, with no height scaling. FFMI divides that mass by height squared, so it compares muscularity across heights. A tall and a short adult with the same build get similar FFMI values but different lean body mass figures.

Sources and Editorial Review

Reviewed by the Heart Score Calculator Editorial Team, November 2026. The method, reference ranges, and limits on this page follow the sources below.

  1. Kouri EM, Pope HG Jr, Katz DL, Oliva P. Fat-free mass index in users and nonusers of anabolic-androgenic steroids. Clinical Journal of Sport Medicine. 1995;5(4):223-228. DOI: 10.1097/00042752-199510000-00003
  2. Schutz Y, Kyle UU, Pichard C. Fat-free mass index and fat mass index percentiles in Caucasians aged 18–98 y. International Journal of Obesity and Related Metabolic Disorders. 2002;26(7):953-960. DOI: 10.1038/sj.ijo.0802037
  3. VanItallie TB, Yang MU, Heymsfield SB, Funk RC, Boileau RA. Height-normalized indices of the body's fat-free mass and fat mass: potentially useful indicators of nutritional status. American Journal of Clinical Nutrition. 1990;52(6):953-959. DOI: 10.1093/ajcn/52.6.953

Related tools on this site: the body fat calculator estimates the body-fat percentage this page takes as an input, the lean body mass calculator estimates fat-free mass in kilograms, the BMI calculator compares total weight to height, the protein intake calculator works from body weight and goal, and the health and fitness hub lists every body-composition and energy tool on the site.